Many people rush to buy an AC unit. But buying too fast can lead to big problems. First, you must know your home size. A small unit in a big house will not cool well. A large unit in a small room will turn off and on too much. That can wear it out fast. At Malik Heating and Cooling, we help you pick the right size for your space.
Do Not Skip the Plan
Installing an AC is not just putting in a machine. You need a full plan. You must think about where to place it. The wrong spot can cause poor air flow. Or it may use too much power. You must also check your electric system. If the wires or panel are old, the unit may not work right. We check all these things before we begin.
Hire a Real Pro
Some people try to install the AC on their own. Others hire cheap workers who are not trained. This is a big mistake. A bad install can lead to leaks, noise, or even damage to the home. You may also lose your warranty. Malik Heating and Cooling has trained techs who follow all safety rules. We do it right the first time.
Do Not Forget the Ducts
Your AC works with ducts to cool your home. If the ducts are full of dust or holes, the air will not flow well. Many people get a new unit but forget to clean or fix their ducts. This makes the AC work harder. It uses more power and breaks faster. We always check your ducts during a new install.
Keep the Right Distance
Some people place the AC unit too close to a wall or fence. This blocks air from moving. It makes the unit overheat. The same is true for indoor units. If they are placed behind furniture or near curtains, they do not cool the room well. Always give space around the unit. We guide you on the best spot to place it.
Check the Drain Line
Your AC pulls water from the air. That water goes out through a drain line. If that line gets blocked, water can leak into your walls or floor. Many bad installs forget to check or clean the drain. At Malik Heating and Cooling, we clean the drain and test it to make sure water flows out the right way.
Use the Right Size Pipes
If the pipes are too small or too big, your AC will not work well. Wrong pipe size can cause the gas to flow wrong. That can lead to poor cooling or damage inside the unit. Some people try to reuse old pipes to save money. That may seem smart but can cause big problems. We use new pipes that fit your unit.
Make Sure It Is Level
Your AC must sit flat. If it tilts, water can leak. The inside parts may also wear out fast. Some workers forget to check if the ground is level before they place the unit. At Malik Heating and Cooling, we level the ground and test the spot before we set the unit.
Test the Unit After Install
Once the unit is in, it must be tested. We turn it on. We check air flow. We check noise. We make sure the cooling is even. Some workers skip this step. They leave before the test is done. That is risky. You may not notice a problem until later. We never leave until the job is tested and done.
Do Not Forget the Thermostat
The AC works with your thermostat. If your old thermostat is slow or broken, the new AC will not cool right. We check the thermostat and replace it if needed. We also show you how to use it the right way.
Seal the Gaps
Gaps around windows or doors can let cool air out. Your AC will work hard but your room will still feel warm. Some people think the AC is bad, but it is the home that needs sealing. We help you find these gaps and show you how to seal them.
Skip the Guesswork
Guesswork leads to stress. A wrong guess in AC work can cost you money and comfort. We use tools to measure, test, and plan each step. We follow codes and safety rules. You never have to guess when you work with Malik Heating and Cooling.
Keep It Clean
Dirt can kill a good unit. After the install, keep your AC clean. Change the filters. Keep leaves and dust away from the outside unit. This helps your AC last longer and work better. We give you simple care tips after every install.
Trust the Process
AC install is not fast and easy. It takes skill and time. We ask you to trust the process. At Malik Heating and Cooling, we work with care. We explain each step. We answer your questions. And we make sure your home stays cool and safe.
Enjoy the Cool
Once your AC is in and working well, your home feels fresh. You sleep better. You work better. You feel calm. A good install means fewer repairs and low power use. That saves you money and stress.
FAQs
1. How do I know if my AC unit is the right size?
We check your room size, layout, and heat level to pick the best size for you.
2. Can I install the AC by myself?
It is not safe. You may void your warranty or cause damage. Always use a trained tech.
3. How long does a proper AC install take?
Most installs take one full day, but it can change based on your home and the unit type.
4. What should I do after the install?
Change the filter often, keep the unit clean, and call us for yearly checks. Malik Heating and Cooling is here to give you peace of mind. No mistakes. No mess. Just cool, clean air done the right way. Call us today and feel the difference.